Ruger Talk Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
An old guy new to semi-autos with a question about the barrel to slide on the SR40C.

On my SR40C; it seems to me that the barrel, at the base perpendicular to the slide opening, should protrude about 1/16th of an inch more through the opening.

When looking at the muzzle it appears that the lower outter chamfer of the barrel is sitting too low in the slide opening.

Has anyone else had this issue and if so, how was it handled? Much appreciated, thank you.
 
1 - 1 of 1 Posts
Top