Ruger Talk Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Looking for a stock to replace .44 Magnum Carbine (tube feed magazine).
Had older model stolen in early 2000's & returned by local Sheriff's Dept
last year. Have entire rifle except for the stock which was totally missing.
Have been unable to locate a new/used replacement.
Any Suggestions appreciated.

Semper Fi!
 

·
Registered
Joined
·
228 Posts
Contact Midwayusa.com customer service. Larry Potterfield and his staff are great at what they do.
1-800-243-3220

I'm sure there are others that would do good work for you or at helping with a replaceable stock. Just can't think of any at this moment.

Also, here in this forum there is a member by the name of Tin can. He may be a good source to look up in bringing your gun back its original state. I've seen and read what he posts and he also does beautiful work. He is a master craftsman.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
I ordered a barrel band & screw from Brownells - I think the barrel band is for a 10/22 not the 44 mag - the screw
they sent is too large for the tap in the barrel band so I suspect the screw is correct but the band may not be.
Can anyone shed some light on whether there is a difference between the bands? I know barrel bands can
be tricky if not fit correctly. Also looking for a steel butt plate, they one they sent me is plastic.
Thanks,
 

·
Registered
Joined
·
228 Posts
I ordered a barrel band & screw from Brownells - I think the barrel band is for a 10/22 not the 44 mag - the screw
they sent is too large for the tap in the barrel band so I suspect the screw is correct but the band may not be.
Can anyone shed some light on whether there is a difference between the bands? I know barrel bands can
be tricky if not fit correctly. Also looking for a steel butt plate, they one they sent me is plastic.
Thanks,
Contact this guy, he is a master craftsman and does the most beautiful work. He may be helpful in what you need.
https://tincanbandit.blogspot.com/2018/01/western-field-45-project-part-3.html
 

·
Registered
Joined
·
228 Posts
Logged onto his blog but could not find a way to Q&A him? any suggestions?
Maybe you can private message (PM) him from here. He posts his work and messages on this forum often.
He should have a working website. I'll try to look him up, then I'll send you a message.
 

·
Registered
Joined
·
228 Posts
Logged onto his blog but could not find a way to Q&A him? any suggestions?
Maybe you can private message (PM) him from here. He posts his work and messages on this forum often.
He should have a working website. I'll try to look him up, then I'll send you a message.
Logged onto his blog but could not find a way to Q&A him? any suggestions?
You may try the following:

TINCANBANDIT's Gunsmithing

https://www.facebook.com/Tincanbandit-Gunsmithing

tincanbandit_gunsmithing

https://tincanbandit.blogspot.com
 
1 - 7 of 7 Posts
Top