Redding/Saeco lubrisizer

Discussion in 'Ammo & Reloading' started by paulruger, May 25, 2019.

  1. paulruger

    paulruger Active Member

    697
    70
    28
    I recently acquired a Redding/Saeco lubrisizer to resize. 349 diameter bullets since neither Lyman or RCBS make a 349 sizing die. It's a little different than my Lyman and RCBS lubrisizers since it has a heavy duty pressure spring inside the lube reservoir. I assume I can back off the spring when I'm done to release the pressure. The instruction manual is laughable to say the least. Anyone here with experience with one of these?
     
  2. Pancho_Villa

    Pancho_Villa Well-Known Member

    1,418
    113
    63
    Nope, I have a Lyman, buit don't use it a lot anymore. Just kinda wondering, a .349?
     

  3. paulruger

    paulruger Active Member

    697
    70
    28
    Yep.......for a Siamese mauser I picked up that was re barreled to 348 winchester!
     
    Pancho_Villa likes this.
  4. Pancho_Villa

    Pancho_Villa Well-Known Member

    1,418
    113
    63
    O.K. Now ir mKes sense.
     
  5. paulruger

    paulruger Active Member

    697
    70
    28
    Pancho......if you want to sell/trade that Lyman let me know!
     
  6. noylj

    noylj Member

    31
    4
    8
    They'll make custom sizers for you. You could even go to the Lee Push-Through sizing and get them to make a custom sizer for you. You can use LLA or 45/45/10 tumble lube.
    Unless the lead bullet is so oversize that a round won't chamber, just shoot them as-cast and tumble lube.
     
    Mowgli Terry likes this.
  7. paulruger

    paulruger Active Member

    697
    70
    28
    I had an RCBS custom die on backorder at midway for 6 months!