Ruger Talk Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Hi ECS - there's no easy way to do this without a lathe and a barrel vise. The 581 series will require removing the barrel and front sight, turning the thread tenon to diameter, threading it, and then turning a shelf for the front sight go back on in its new location. Reinstallation of the barrel and front sight finishes it up. Threaded 1/2x28 and done properly you can add a plethora of things including a can if you have the means. You might find a local Smith who will do it but most likely you'll need to send it to someone. Let me know if I can be of help -

Doc
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top