Ruger Talk Forums banner
1 - 20 of 32 Posts

·
Banned
Joined
·
12,933 Posts
Exactly what are you asking, or looking for , and where are you looking?



Jim
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #4 ·
22shooter
Looking for info as to number of these rifles produced and aprox. Value.
Thanks for the reply phideaux and Bikhawk73
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #6 ·
22shooter
Greatfull for any help . Tried Ruger factory and blue book current and older.
This was produced 1/3/98 by ruger info.
Thanks Ruger fan from Illinois
 

·
Registered
Joined
·
436 Posts
Hmmm, could this possibly be a t-ts instead of a tr-s? Brown laminated stock with the Ruger name laser etched into the web of the stock?
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #8 ·
22shooter
Model was tt/s stock model 01138 laser etched stock.i have big fingers,tr are too
Close.

Thanks Blkhawk73
 

·
Registered
Joined
·
436 Posts
Ok, so the 10/22 T-TS: Just under 700 produced. Known examples fall within the 246-86224 to 246-86729 and the 248-47836 to 248-71627 range.
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #10 ·
to Blkhawk 73
Serial is correct area . New in the box with papers.Need to know approx.value
And we are set unless Hillory tries to get them.
thanks a lot. 22shooter
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #12 ·
22 shooter. I
I was told the other day that less than 400 of the10/22tt/s thumb hole
Stocked rifles we're made, regardless , what kind of value would they
Have?



Thank you
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #13 ·
22shooter Does anyone belong to or know about the Ruger collectors association?
When calling Ruger Factory for info ,they tell us to call the association.
I would like to talk to a person but always get a recording.
Anyone with better timing know if it's worth the persuit?
Thanks22shooter IL.
 

·
Registered
Joined
·
436 Posts
RCA and now the ROSC likely aren't going to just be able to give a value. Check GunBroker and look at completed auctions for the exact model. If nothing, join and ask the folks on RugerForum.com. The two collector groups have forums but the folks there focus more on the single actions and rifles.
My previous info was from the RENE which is basically, THE encyclopedia of everything firearms for Ruger and is most always compiled from very reliable information, much of which is acquired directly from employees and distributors.
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #15 ·
22 shooter. Thanks Blkhawk ,I tried what you said, but no
Iisting yet however I will keep checking. Maybe I have the only one made Ha HA. THANKS
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #16 · (Edited)
22 ruger 10/22 tr/s model01138 thumb hole laminated brown stock. Can't get...

22shooter. I was abel to find a used 10/22tt/s on gunbroker for 1095 .00 the other day, but no new arms.have an idea of 400 to 700 production run. Any good info would helpful.













Anyone with info on10/22 tt/s it would be GREAT.
22shooter ILL.
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #17 ·
Went to the local gunshow today and only one dealer knew of the10/22tt/s
Ruger rifle. The other day a gentleman who worked with a friend at ruger
Told him that less than 300 of this rifle were made.


22 shooter.
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #18 ·
..I called Ruger customer service Monday pm.to find info on the 10/22tt/s
The only fact I was able to find was the date of production and that it was
Regular production rifle. They were not aloud to tell production amount.
He was a nice guy, however you can't find out anything you want to know.
This is so called Customer Service.

Mm. 22. shooter
 

·
Registered
Joined
·
39 Posts
Discussion Starter · #19 ·
22shooter
I looked at a S&w model 57 6" brl . This is a 41 Mag. N serial , production 1981
Era. Original box has model and serial and caliber correctly. However the
barrel has 44 magnum stamped on the barrel. After checking barrel and
cylinder it is 44 caliber.
Bluing color is perfect cylinder has been fired only two cylinder holes from
factory. S$W will tell you nothing. Historical soc. will tell you how it left the
Factory for 75.00 bucks.The box label and numbers on gun tell me how it
Left the factory. Any one have any ideas on this and what this old gun
would be worth as a one of a very few. Has shipping box blue box with papers
and lined wooden box.

thanks 22shooter
 
1 - 20 of 32 Posts
Top