10/22 Stock Takedown Screw/bolt

Discussion in 'Ruger Rimfire Forums' started by coolride88, Sep 13, 2017.

  1. coolride88

    coolride88 New Member

    Help - some advise please.

    I brought a new 10/22 stainlness this month.

    The factory takedown bolt is stripping the copper thread on the stock. You could see the copper metal filings in the thread of the bolt.

    The bolt looks like a hardware store bolt, saw-off.

    Do you have a similar problem?


    Many thanks...

    Attached Files: